Support grids for high jump mats

Perfect protection against moisture, mould and rotting

The basis for every high jump mat

A support grid, also called a grid base or slatted grid, is essential for using a high jump mat outdoors. The support grid ensures optimal ventilation of the landing mat. Waterlogging and moisture penetration into the mat from below as well as the consequences such as mould and algae formation are thus effectively avoided. The service life of a high jump mat is thus significantly increased. In addition, a floor grid prevents the high jump mat from slipping when using the optional support brackets.

We offer two variants, both Made in Germany.

Vennekel® Support grid aluminium

back to overview
  • High stability
  • Almost unlimited resistance to weathering
  • Lateral height: 10 cm
  • Handy weight
  • Available as a mobile variant

Made entirely of aluminium, this floor grate has a high level of stability and is resistant to almost all weather conditions. The large-dimensioned rectangular tubes with welded-on wide rectangular profiles (80 x 20 mm) give the floor grating a high degree of stability. The elastic contact surface contributes to energy dissipation during the athlete’s landing. An important safety feature is the floor-level safety closure to the front of the mat. This prevents the jumping foot from sliding under the slatted frame. Recesses are provided in the support grid for the high jump stand feet. Depending on the total size of the floor grate, delivery is in 2 or 3 parts. For high jump facilities that have to change their location frequently, we also offer the aluminium floor grid as a mobile version.

Available sizes:

400 x 250 cm
400 x 300 cm
500 x 300 cm
600 x 300 cm
500 x 400 cm
600 x 400 cm

Accessories: support bracket

The optionally available support brackets prevent the high jump mat from slipping and hold it permanently in the correct and safe position on the floor grid.

Request a quote

Wir verarbeiten Deine Angaben zur Beantwortung Deiner Anfrage. Informationen findest Du in unseren Datenschutzhinweisen.

* Pflichtfeld

We process your information to respond to your request. You can find information in our privacy policy.

* Mandatory field

Vennekel® Support grid wood

back to overview
  • Made from a renewable raw material
  • Weatherproof larch wood
  • Lateral height: 12 cm
  • Consisting of handy, stackable elements

Made from a natural raw material and at the same time very cost-effective and sustainable, the wooden floor grid for high jump mats is still a frequently used variant. Vennekel is the only company on the market to use weather-resistant larch wood, which significantly reduces the disadvantages in terms of durability. The front and back (long sides) of the support grid is equipped with a floor-level safety edge, eliminating the risk of injury from the jumping foot slipping under the grid. The slatted frame is open at the side for optimal ventilation of the high jump mat. Waterlogging is thus avoided. The front is equipped with openings for the high jump stand feet.

Available sizes:

400 x 250 cm
400 x 300 cm
500 x 300 cm
600 x 300 cm
500 x 400 cm
600 x 400 cm

Accessories: support bracket

The optionally available support brackets prevent the high jump mat from slipping and keep it permanently in the correct and safe position on the floor grid.

Request a quote

Wir verarbeiten Deine Angaben zur Beantwortung Deiner Anfrage. Informationen findest Du in unseren Datenschutzhinweisen.

* Pflichtfeld

We process your information to respond to your request. You can find information in our privacy policy.

* Mandatory field